EVTEC
We recommend using ECP version 4.x.x with Modbus 2.0 for all charging stations. If you do not have an ECP version 4.x.x, please contact the EVTEC service team:
[email protected] / +41 41 322 23 86
Integration of EVTEC Charging Stations
Our systems support the integration of all EVTEC charging stations. The following models are supported:
- moka corretto system
- bricco corretto system
- ristretto&charge
- cappuccino&charge
- crema&charge
- move&charge
Communication takes place via the EVTEC Modbus protocol. EVTEC provides two different protocol versions:
- EVTEC Modbus 1.0
- EVTEC Modbus 2.0
The selection of the correct protocol depends on the installed ECP version of the charging station.
ECP version 3.x.x and older
- Supports EVTEC Modbus 1.0 only
- EVTEC Modbus 2.0 is not compatible
- We recommend upgrading to ECP version 4.x.x
→ More information: EVTEC Modbus 1.0
ECP version 4.x.0 and newer
- You can choose between EVTEC Modbus 1.0 and EVTEC Modbus 2.0
- Both protocols are technically supported
Recommendation:
For new integrations, we recommend using EVTEC Modbus 2, as this protocol represents the current and future-proof implementation.
→ More information: EVTEC Modbus 2.0