 Benvenuti nell'Help Center CLEMAP Grazie per aver scelto i prodotti CLEMAP per la gestione e il monitoraggio dell'energia.  Questo Help Center è progettato per fornirvi le informazioni necessarie per l'installazione e l'utilizzo efficace del CLEMAP Load Management e del CLEMAP Energy Monitor.

Centro Assistenza

Load Management

 Le note sulla versione del firmware dei prodotti CLEMAP Load Management (C-LM) e CLEMAP Energy Monitor (C-EM) sono disponibili unicamente in inglese .

Note sulla versione

 The CLEMAP Load Management system has two relay outputs ( OUT A and OUT B ) that can be automatically opened or closed depending on the configuration.  These outputs can be used, for example, to control a contactor or activate other external components .

How do I configure the outputs (relays) on the CLEMAP Load Management system? (cloned)

Domande frequenti

Downloads

Installation plans

Italiano

Help Center

CLEMAP Help Center

Kundenservicezentrum

Installationsvoraussetzungen

Schritt 1: Elektrische Installation

Schritt 2: CLEMAP-Anschluss an ein WLAN-Netzwerk oder über Ethernet-Kabel

Schritt 3: Aktivierung auf floem.clemap.com

Schritt 4: Einbindung der Ladestationen, Steuerung und Kontrolle

Schritt 5: Einbindung Rundsteuersignal/FNN-Steuerbox vom Energieversorgungsunternehmen

Ladestationen (Kompatibilität & Konfigurationen)

Zugriffsdaten für Cloud-Anbieter

Smart Meter Konfigurationen

Häufig gestellte Frage bei der Installation

Lizenzen

CLEMAP Energy Monitor Installationsanweisung

Versionshinweise

Installationspläne

CLEMAP Lastmanagement Installationsanweisung

Cloud-Anbieter Zugangsdaten

Zu Floem

Für Installateure

Häufig gestellte Fragen

Wie erstelle ich ein Support-Ticket im CLEMAP-Supportportal?

Lade- und Lastmanagement mit CLEMAP und Solar Manager

Deutsch

Centre d'assistance

Prérequis d'installation

Étape 1: Installation électrique

Étape 2: Connexion du CLEMAP à un réseau WLAN ou via un câble Ethernet

Étape 3: Activation sur floem.clemap.com

Étape 4 : Intégration des stations de recharge, commande et contrôle

Étape 5 : Intégration du signal de télécommande centralisée du fournisseur d'énergie

Configurations des bornes de recharge

Configurations des Smart Meter

FAQ - Questions fréquemment posées lors de l'installation

Licenses

Données d’accès au fournisseur de cloud

CLEMAP Energy Monitor  Instructions d'installation

Gestion de la charge et du pilotage énergétique avec CLEMAP et Solar Manager

Notes de version

Plans d'installation

Plans d'installation (cloned)

Français

Customer Support Center

Installation requirements

Step 1: Electrical installation

Step 2: CLEMAP connection to a WIFI network or via Ethernet cable

Step 3: Activation on floem.clemap.com

Step 4: Integration of the charging stations, control and monitoring

Step 5 : Integration of ripple control signal from power supply company

Charging Station Configurations

ChargeAmps Halo

Cloud provider access data

Smart Meter configuration

FAQ Frequently asked question during installation

Licensing

CLEMAP Energy Monitor  Installation manual

Release Notes

About Floem

For Property Owners / CLEMAP One

For Installers

Wie erstelle ich ein Support-Ticket im CLEMAP-Supportportal? (cloned)

Frequently Asked Questions

English

Requisiti di sistema

Passo 1: Installazione elettrica

Passo 2: connessione del CLEMAP a una rete WLAN o tramite cavo Ethernet

Passo 3: Attivazione su floem.clemap.com

Passo 4: Integrazione delle stazioni di ricarica, controllo e monitoraggio

Passo 5: Integrazione del segnale di controllo dell'ondulazione dalla società elettrica