Easee

important notice regarding the installation of the easee charging station with clemap for the integration, the site key and the circuit id are required without this information, a correct connection is not possible both details can be found in the easee portal at https //control easee com/portal/sites before commissioning, it must be ensured that access to the correct site is available and that all required information is complete only the master charging station needs to be added as a "charging station" and represents the entire easee circuit slave stations will appear as individual charging plugs of your master station on clemap floem 1\) you can find your site key in your easee admin portal, it appears next to your address 2\) the circuit id can be found exclusively in the url of your branch go to your products and then click on the name of the circuit branch (marked in the following picture) this should lead you to the page of that circuit 3\) now insert your site key and circuit id in the clemap interface please don't forget to add your easee cloud credentials so that the clemap load management device can control the easee charging station via the easee cloud detailed instructions can be found on the help center about docid\ ppfyn4mzblgo 5 c8uivz the name assigned to individual charging stations (entered in the easee portal) is automatically synchronized with the clemap floem portal every 20 minutes in case of changes or after a restart of the clemap load management system happy charging!