Siemens PACxxxx
To connect the PAC to the CLEMAP system, the CLEMAP Load Management gateway must be connected to the Internet.
Then, please contact [email protected] and provide the following information:
- the serial number of the CLEMAP device
- the local IP address of the PAC
🔧
Factory default settings:
Network configuration via DHCP
Recommendation for use with CLEMAP Load Management:
To ensure reliable communication with the CLEMAP Load Management system, we recommend integrating the PAC into the local network (LAN).
For stable system functionality, it is advisable to assign a static IP address to the device.
This facilitates:
- configuration in the CLEMAP Floem dashboard,
- troubleshooting in case of communication issues,
- and long-term maintenance of the installation.
Note: The IP configuration can be done directly via the PAC web interface or using network tools.