EVTEC Modbus 1

this implementation uses the legacy modbus registers from evtec it is compatible with all the stations up to 3 plugs remember to use modbus 1 0 on the evse, evtec technitian should know to install the evtec you have to treat every different socket as a loading station, so that we also use our load management between the sockets so for the three of them you pick the same ip address and port 5020 the only difference is the model then you pick evtec plug 1 (dc) for the first socket evtec plug 2 (ac) for the second socket and evtec plug 3 (dc) for the third socket if the station only has 2 sockets, please pick plug 1 and plug 2 plug 3 would not react in this case even if both are dc plugs, choose 1 and 2 1\) pick each socket model and their limits note that port is 5020 2\) once all 3 sockets information is filled, save changes happy charging!