English
...
Load Management
Charging Station Configuration...
EVTEC capuccino&charge
For crema&charge remember to use Modbus 1.0 on the evse, EVTEC technitian should know.
To install the EVTEC you have to treat every different socket as a loading station, so that we also use our load management between the sockets:
- So for the three of them you pick the same IP Address and port 5020.
- The only difference is the Model: Then you pick EVTEC Plug 1 (DC) for the first Socket.
- EVTEC Plug 2 (AC) for the middle AC socket.
- And EVTEC Plug 3 (DC) for the third socket.
1) Pick each Socket model and their Limits. Note that Port is 5020.
2) Once all 3 Sockets information is filled, save changes.
Happy charging!