---
title: Nex2
slug: help-center/nex2
docTags: 
createdAt: 2025-05-05T09:20:43.835Z
---

**1)** Modbus can only be activated remotely by **Intesys Srl** engineers. Make sure your charger is connected to Internet and please contact them to activate Modbus on the device:

:::hint{type="info"}
Ing. Prasath Deenadayalan [deenadayalan@intesys-srl.it](mailto\:deenadayalan@intesys-srl.it) 

Ing. Stefano Moresco [moresco@intesys-srl.it](mailto\:moresco@intesys-srl.it)
:::

:::hint{type="danger"}
There is a register conflict, make sure the **Intesys Srl **engineer knows this when configuring the charger! Our holding register** 0**, is holding register** 1** in the charger.
:::

**2) **Once modbus is activated, just add the charger with port and IP address to the CLEMAP interface in the load management tab. The modbus Port for Nex2 stations is **8000**.

Depending on the plug configuration of your charger, please select the proper Model:



![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/Dj3gNiO4YcRILOCOj6QCM_image.png)

Happy Charging!