---
title: NexBlue Edge Max and Delta Max
slug: help-center/k1z-nex-en
docTags: 
createdAt: 2026-06-25T09:04:24.568Z
---

1. Connect the NexBlue Edge Max charging station to your LAN using an Ethernet cable.
2. Then connect the power cable to switch on the charging station.
3. Download the **NB Partner** mobile app to your smartphone and enable **Bluetooth**.
4. Hold your smartphone close to the charging station's connector and follow the instructions in the app to:

- create a user account,
- create a location,
- create a circuit,
- integrate the charging station.

:::Paragraph{indent="1"}
When creating the circuit, make sure to set the correct maximum charging current.
:::

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/aDPZ9sTYcG_Y4qQFlAdVj_nexblue-01.png" size="60" isUploading="false" width="1170" height="2532" darkWidth="1170" darkHeight="2532" showCaption="false" uploadStartedAt="1782526970518"}

5. In the app, go to **Settings** and update the firmware.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/_3HFpQt1dzrLFbMDmOGmc_nexblue-02.png" size="60" isUploading="false" width="1170" height="2532" darkWidth="1170" darkHeight="2532" showCaption="false" uploadStartedAt="1782526970518"}

6. Under **Network**, select **Ethernet** as the network connection.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/KdPJ7b792ykE8rSIGQMNY_nexblue-03.png" size="60" isUploading="false" width="1170" height="2532" darkWidth="1170" darkHeight="2532" showCaption="false" uploadStartedAt="1782526970518"}

7. Enable **DHCP** if the IP address should be obtained automatically. Alternatively, you can configure a static IP address.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/Joy2UhQ5jU5EKwjVmStoa_nexblue-04.png" size="60" isUploading="false" width="1170" height="2532" darkWidth="1170" darkHeight="2532" showCaption="false" uploadStartedAt="1782526970518"}

8. Under **Settings**, enable the **Modbus TCP** function.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/okTvTe2I7dGqqdkY3fxdT_nexblue-05.png" size="60" isUploading="false" width="1170" height="2532" darkWidth="1170" darkHeight="2532" showCaption="false" uploadStartedAt="1782526970518"}

9. For initial functional tests, the **Access Level** can be set to **No Restrictions**.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/AdmDyATxZwO6EbucEYmsU_nexblue-06.png" size="60" isUploading="false" width="1170" height="2532" darkWidth="1170" darkHeight="2532" showCaption="false" uploadStartedAt="1782526970516"}

10. After testing, set the **Access Level** back to **Authorized Users Only**. In this mode, access is only possible via the **myNexBlue app** or an authorized RFID card.
11. Connect a laptop to the same LAN as the charging station.
12. Determine the charging station's IP address using an IP scanner tool. Note: no web interface is available at this IP address.
13. The IP address and Modbus TCP port **502** serve as the access credentials for Modbus communication.
14. Enter the IP address and port **502** in the FLOEM portal to connect the charging station.