---
title: NRGkick Gen2
slug: help-center/jEcc-nrgkick-gen2
docTags: 
createdAt: 2025-10-17T18:00:04.025Z
---

### Commissioning the NRGkick with WiFi and Modbus API connection

**Install and connect the NRGkick app**

Download the **NRGkick mobile app**, install it on your smartphone, and create a user account. Then enable **Bluetooth** on your phone and **connect to the charging station.**

**Establish the WiFi connection**

Open the **settings** in the app and add the **WiFi network **that the charging station should connect to. Use the same WiFi or LAN network where the **Clemap Edge Device **is located.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/lYKNke6SYbP123CFMsoVK-20251017-131758.png" size="50" width="1170" height="2532" position="center" darkWidth="1170" darkHeight="2532" showCaption="false"}

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/JJ3dMaYCgEz1lH8QrK_nH-20251017-131544.png" size="50" width="1170" height="2532" position="center" darkWidth="1170" darkHeight="2532" showCaption="false"}

**Enable the Modbus API**

Go to **Settings → Local API** and activate the **Modbus API**. Then press **Save**. In the same window, the IP address of the charging station is displayed at the bottom. Write it down.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/7wWKepkw8-NHA2WHWNQj6-20251017-131659.png" size="50" width="1170" height="2532" position="center" showCaption="false"}



::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/OkXD8CTyyS2ilrHOtv5lF-20251017-131729.png" size="50" width="1170" height="2532" position="center" showCaption="false"}

**Configure the advanced functions**

In **Settings → Extended Features**, deactivate all options except **Silent Mode**.

This means:

- **Charging Current Decimal Mode: **OFF
- **Phase Switching: **OFF
- **Config Mode: **OFF
- **Silent Mode: **ON

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/dO2gUGIm7s4UF1K0Xlo4l-20251017-131457.png" size="50" width="1170" height="2532" position="center" showCaption="false"}

**Note on maximum charging current (Current max)**

Depending on the **charging adapter** used, the maximum charging current is set automatically:

Small adapter: max. **8 A**

Larger adapter: **max. 32 A**

If you try to set a value higher than the permitted maximum current, the value will remain limited to the respective upper limit, for example 8 A.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/YQo_VqpPP2XawxG7cDPmt-20251017-131825.png" size="50" width="1170" height="2532" position="center" showCaption="false"}

**Access the web interface**

If your laptop is on the **same LAN network** as the charging station, you can open the web interface by entering the previously noted **IP address** into your browser’s address bar. In the web interface, under the **API** section, you will find the **current operating data** and can also make **certain settings **there.