---
title: Hager Witty Plus
slug: help-center/hager-witty-plus
docTags: 
createdAt: 2025-07-03T08:46:32.765Z
---

**For detailed instructions, please refer to the installation and user manuals.**

::File{src="https://api.archbee.com/api/presign/3Xh9z-k7HF8ThwnEZ6HI0-T_jM299sBOmTpyjnKypiN-20250703-091932.pdf" label="6LE090394A_Charging Station witty_plus_cable_XVL122Cxx_en.pdf"}

::File{src="https://api.archbee.com/api/presign/3Xh9z-k7HF8ThwnEZ6HI0-tIIbgnbS4Vdhi2rdl_NUc-20250703-091956.pdf" label="6LE089939A_witty_plus_cable_Quickguide_multi-lang_2025-03.pdf"}

**Charging Station Software Configuration**

This quick guide explains how to connect the charging station to the local network and activate Modbus TCP.

- Download the ***Hager Charge*** app to your mobile phone.
- On your mobile phone, in the ***Bluetooth settings***, connect to the charging station.
- Launch the *Hager Charge* app and go to ***General settings > Network*** and select ***Wired***.
- Connect the charging station to the local network using an ***Ethernet cable.***
- By default, the charging station is configured to use the *Dynamic Host Configuration Protocol (DHCP)*, which automatically assigns an IP address via the router or switch. The ***IP address ***can be found in the app.
- In the app, under ***Load Management***, enable ***Modbus TCP***.



::Image[]{src="https://api.archbee.com/api/optimize/3Xh9z-k7HF8ThwnEZ6HI0-LL3ap4IuDQJnu2sTRtRK1-20250703-121052.png" size="48" width="1170" height="2532" position="center" showCaption="false"}

- You can now communicate with the charging station via Modbus TCP.
- The charging station uses the following coding for the status LEDs:



![](https://api.archbee.com/api/optimize/3Xh9z-k7HF8ThwnEZ6HI0-BzlFKZbA5BUGUNjbu_O5_-20250703-123951.png)

- Use the RFID chip (badge) when you want to charge.