---
title: EVTEC
slug: help-center/evtec
docTags: 
createdAt: 2026-02-19T15:54:39.570Z
---

:::hint{type="info"}
We recommend using ECP version 4.x.x with Modbus 2.0 for all charging stations. If you do not have an ECP version 4.x.x, please contact the EVTEC service team:

service\@evtec.ch / +41 41 322 23 86
:::

### Integration of EVTEC Charging Stations

Our systems support the integration of all EVTEC charging stations. The following models are supported:

- moka corretto system
- bricco corretto system
- ristretto\&charge
- cappuccino\&charge
- crema\&charge
- move\&charge

Communication takes place via the EVTEC Modbus protocol. EVTEC provides two different protocol versions:

- EVTEC Modbus 1.0
- EVTEC Modbus 2.0

The selection of the correct protocol depends on the installed ECP version of the charging station.

### ECP version 3.x.x and older

- Supports EVTEC Modbus 1.0 only
- EVTEC Modbus 2.0 is not compatible
- We recommend upgrading to ECP version 4.x.x

→ More information: [EVTEC Modbus 1.0](docId:7RN-wq1a_4TfAxZgbK_ZN) 

### ECP version 4.x.0 and newer

- You can choose between EVTEC Modbus 1.0 and EVTEC Modbus 2.0
- Both protocols are technically supported

**Recommendation:**

For new integrations, we recommend using EVTEC Modbus 2, as this protocol represents the current and future-proof implementation.

→ More information: [EVTEC Modbus 2.0](docId\:LPODtLwvfmvah93ySlCzv)