---
title: Elecq OCPP Home
slug: help-center/elecq-ocpp-home-en
docTags: 
createdAt: 2024-11-20T12:25:24.705Z
---

This guide walks you through connecting an Elecq charging station to a CLEMAP device via OCPP, step by step — for both a standard connection and a proxy connection.

## Step 1: Configuration in the Elecq Partner App

**1.1** Open the **Elecq Partner App** on your phone.

**1.2** Scan the device's **QR code**, or enter the **serial number** and matching **password** manually.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/aggHC4qbJ0yWNoO5fMXFw_image.png" size="60" width="545" height="779" position="center" darkWidth="545" darkHeight="779" showCaption="false"}

**1.3** In the app, open the **"Config Tools"** section.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/YfpoTW7vEkGgONyAeqPwE_image.png" size="48" width="538" height="851" position="center" darkWidth="538" darkHeight="851" showCaption="false"}

**1.4** Connect to the **charging station** and open the **OCPP settings**.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/_cuR8SykOQj8RBvEz3EJw_image.png" size="48" width="267" height="503" position="center" darkWidth="267" darkHeight="503" showCaption="false"}

**1.5** Under **OCPP Server**, add a **custom server**.

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/RLCIinOBZd4cUYG0hdlET_image.png" size="38" width="260" height="407" position="center" darkWidth="260" darkHeight="407" showCaption="false"}

**1.6** In the **Server** field, enter the **OCPP URL of the CLEMAP device**.

:::hint{type="info"}
To find the **clemap\_lm\_edge\_device\_ip\_address**, scan the local network and look for the sensor's IP address.
:::

For a **standard connection**, enter the following URL:

```javascript
ws://[clemap_lm_edge_device_ip_address]:7050/
```

For a **proxy connection**, use this instead:

```javascript
ws://[clemap_lm_edge_device_ip_address]:8050/
```

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/InAsb8wAr449T6EPDMHIw_image.png" size="34" width="263" height="370" position="center" darkWidth="263" darkHeight="370" showCaption="false"}

## Step 2: Configuration in FLOEM

**2.1** For a **proxy connection**, add the **Identifier** and the **additional backend URL** in the **charging station configuration** in FLOEM.

:::hint{type="danger"}
**Proxy connection with Sintio**

- First establish a direct connection to the **Sintio backend** and restart the charging station.
- Once the charging station appears in the eCarUp backend, change the station's **ocpp\_url** to `ws://[clemap_lm_edge_device_ip_address]:8050/` and restart the charging station again.
- Otherwise, the charging station may not appear in the eCarUp backend.

Note: There is currently an issue with the **BootNotification** that we are working to resolve. Thank you for your understanding.
:::

**2.2** For a **standard connection**, you only need to add the **Identifier**.

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/8bA9A1M9EwakInTVtx9g5_grafik.png)

:::hint{type="danger"}
The **Identifier** is critical. If it **does not match the Identifier** stored in the **charging configuration**, the **connection will be rejected**.
:::

## Example

Here is an example from one of our customers using a **proxy connection with eCarUp**:

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/dJG3YSlVJqtA-UXl0AYmU_charger-configuration-text.jpg)

Happy Charging!