---
title: Webasto Next
slug: help-center/bpw9-webasto-next
docTags: 
createdAt: 2023-10-23T10:36:01.308Z
---

**1)** Connect to WebUI via charging station IP address or serial n°. For example: https\://next-ws110862

- Or 172.20.0.1 (localinterface)
- Login: admin
- Password: Master Password on Users Manual

**2) **Enable advanced view:

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/tDYDhP2W-OPMI6bKWzaLZ_image.png)

**3)** **IMPORTANT:** In HEMS tab -> Mode: HEMS activated

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/wigLDt05SQT--u5ZcU2vC_image.png)

**For LAN connection:**
**1)** In Backend tab, make sure connection type is LAN 
**2)** In Network tab check that LAN option is on.

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/GYqoWUfjNF3Tn7Dl87KKr_image.png)

**3)** Turn DHCP off. 
**4) **Add a static IP address in the following format, e.g. 192.168.1.50/24
**5)** In system tab: Restart system

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/cs0ZV0VF-WZAAWcijmaff_image.png)

**For WLAN insteadof LAN connection:**

**1)** Set your Wifi SSID and password

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/qMGZghJpoiHNB-hVi_DiP_image.png)

In BACKEND tab:

**2) **Set backend on WLAN

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/X5vGee8CJ8xA9yeVlvDGa_image.png)

In HEMS tab:

**3)** Set HEMS Mode: HEMS activated

**4)** Set Connection type: WLAN

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/UgfOoqK22AFACXBX2llki_image.png)

In SYSTEM tab:

**5)** Click on restartsystem.

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/XBoZyJn9IRmfz5STreV8g_image.png)

Happy charging!