 It is required that Compleo enables the stations modbus communication. Please contact Compleo so that they enable it for you remotely.

 Then find the ip address of the station and modbus port (502) and add it to your confirguration in the CLEMAP portal.

NOTE: The minimal current shall be set to 8A or 10A instead of 6A, for certain cars like Renault Zoe for example.

Circontrol

Compleo CITO 500

Compleo DUO

Help Center

CLEMAP Help Center

Kundenservicezentrum

Installationsvoraussetzungen

Schritt 1: Elektrische Installation

Schritt 2: CLEMAP-Anschluss an ein WLAN-Netzwerk oder über Ethernet-Kabel

Schritt 3: Aktivierung auf floem.clemap.com

Schritt 4: Einbindung der Ladestationen, Steuerung und Kontrolle

Schritt 5: Einbindung Rundsteuersignal/FNN-Steuerbox vom Energieversorgungsunternehmen

Ladestations-Konfigurationen

Smart Meter Konfigurationen

Häufig gestellte Frage bei der Installation

Lizenzen

Untitled

CLEMAP Energy Monitor Installationsanweisung

Versionshinweise

Zu Floem

Für Eigenheimbesitzer / CLEMAP One

Für Installateure

Installationspläne

Downloads

CLEMAP Lastmanagement Installationsanweisung

Customer Support Center

Installation requirements

Step 1: Electrical installation

Step 2: CLEMAP connection to a WIFI network or via Ethernet cable

Step 3: Activation on floem.clemap.com

Step 4: Integration of the charging stations, control and monitoring

Step 5 : Integration of ripple control signal from power supply company

Charging Station Configurations

Smart Meter Configurations

FAQ Frequently asked question during installation

Licensing

Load Management

CLEMAP Energy Monitor  Installation manual

Release Notes

About Floem

For Property Owners / CLEMAP One

For Installers

Installation plans

English

Centro Assistenza

Configurazioni degli Smart Meter

Requisiti di sistema

Passo 1: Installazione elettrica

Passo 2: connessione del CLEMAP a una rete WLAN o tramite cavo Ethernet

Passo 3: Attivazione su floem.clemap.com

Passo 4: Integrazione delle stazioni di ricarica, controllo e monitoraggio

Passo 5: Integrazione del segnale di controllo dell'ondulazione dalla società elettrica

Configurazioni delle Stazioni di Ricarica

FAQ – Domande frequenti durante l'installazione

Licenze

CLEMAP Energy Monitor Istruzioni di installazione

Note sulla versione

Su Floem

Per proprietari, utenti CLEMAP One

Per installatori

Piani di installazione

Centre d'assistance

Configurations des Smart Meter

Prérequis d'installation

Étape 1: Installation électrique

Étape 2: Connexion du CLEMAP à un réseau WLAN ou via un câble Ethernet

Étape 3: Activation sur floem.clemap.com

Étape 4 : Intégration des stations de recharge, commande et contrôle

Étape 5 : Intégration du signal de télécommande centralisée du fournisseur d'énergie