---
title: Compleo eBox
slug: help-center/6nVu-compleo-ebox
docTags: 
createdAt: 2023-09-23T13:00:53.106Z
---

**1) **Open the box and connect the Lan Cable.

- Connect one end of the LAN cable to the** port 8** on the eCLICK that is labeled "LAN1" (**net1**). Connect the other end of the LAN cable to your PC. 

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/cnPx-YWGlu_gQcwuSiS-7_image.png)

**2)** Connect Lan cable to your PC and go to **Network Connection** and then select **Ethernet Properties**.

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/8NPR2pLsj9W7k0YSxPW5W_image.png)

**3)** Set your **IPv4** to 172.16.0.99 or in my case to \*192.168.1.99 or \*192.168.11.146. This way we will connect to the webinterface locally.

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/WvUO33MgT1VxcpKzEhuUy_image.png)

**4)** Connect to the **webInterface** "WebConfig" <u>http\://172.16.0.1/</u> and login with admin and password.&#x20;

Username: *admin&#x20;*&#xA;Password: *\<PUK>*, usually at the back of the manual

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/9oSZjiBhzcb-h_FliusSv_image.png)

**5)&#x20;**&#x49;n Netzwerk --> Interface: Set WAN aktiv. Choose net2 (port 2a). Then set your static IP address, matching your networks IP structure.&#x20;

- Change to match you&#x72;**&#x20;local IP** settings and set &#x61;**&#x20;static** one that is unique in your network, in my case to \*192.168.11.162&#x20;
- **net2** = Network 2 (port 2a on the eCLICK) ist the port
  for loadmanagement an internet (Backend)
- **net1** = Network 1 (port 8 on the eCLICK) is the port
  for locally configuration of the eBOX

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/KDaHfPp8aF4cij_h9fx73_image.png)

**6)** In LDP1 -> Lastmanagement: <u>Choose Type:</u> **modbus\_tcp**. And the interface to **net2** and Port on **502**.&#x20;

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/lAmx0GasBW_UWXkpw0dHK_image.png)

**7)** Open the box and connect the LAN cable to CLEMAP.&#x20;

- Connect one end of the LAN cable to the **port** **2a** on the eCLICK that is labeled "LAN2" (**net2**). Connect the other end of the LAN cable to your CLEMAP Edge Device to the same network.&#x20;



![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/9j1z2dt69RExW2v5QQe7__image.png)

- Remember to always save changes in the webInterface "WebConfig"&#x20;
- Always connect the white ribbon cable of the eBOX to **port 1** of the eCLICK&#x20;

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/yRsIbK9lKqul7Oaqe5SI-_image.png)

**8)&#x20;**&#x43;onnect your charging station to your local network and your CLEMAP Load Management to the same network.

- Set the Compleo charging station **ip address** and **502** Port in the Edge Device‘s WebUI and you are all set.

Please select the version of your eBox hardware:

- **0.1** if it is lower than 2.0.34
- **2.0.34** if it is between 2.0.34 and 2.1.0
- **2.1.0** if it is 2.1.0 or higher.

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/iijq669CnA2gUWpOUXrZ0_image.png)

:::hint{type="warning"}
Note that for the last management to work you need ebox **fw2.0.3&#x20;**&#x6F;r higher. And for the billing to work you need **fw2.0.1** or higher. You have to update them manually on the ebox interface.

You can find them here: [https://vaylens.atlassian.net/wiki/external/YWFhOGIzOGY3MDkxNDM1N2EyZGI3NTUxMGU5NzJiN2Y](https://vaylens.atlassian.net/wiki/external/YWFhOGIzOGY3MDkxNDM1N2EyZGI3NTUxMGU5NzJiN2Y)
:::

Update path:&#x20;

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/0Pngct7B4OUQsjfUoV2nb_image.png" size="50" width="447" height="548" position="center" showCaption="false"}

Happy Charging!