---
title: Raedian Gemini
slug: help-center/4E3O-raedian-gemini
docTags: 
createdAt: 2024-11-20T12:25:24.705Z
---



**1)** Use the RAEDIAN Install app in your phone.

**1.1)** Go to Gemini and scan your station:


::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/gt9LvwNDKX8o9s32oKJnV_image.png" size="60" width="547" height="847" position="center" showCaption="false"}

**1.2)** Once conncetcted via Bluetooth, configure the OCPP Profile:



::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/7vNP45VqQnFkDWI2DIB9Q_image.png" size="54" width="265" height="429" position="center" showCaption="false"}



**1.3)** Create a new Profile setting the URL with the CLEMAP device IP. 

:::hint{type="info"}
For the sensor\_ip\_address you have to do a scan in the local network and find it
:::

For a **Normal connection**, enter the clemap OCPP server url: ws\://\[sensor\_ip\_address]**:7050**/

For a **Proxy connection**, you need to access a different port, so the url is: ws\://\[sensor\_ip\_address]**:8050**/



::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/5AYIj_IBsCVIi5NspGrPw_image.png" size="48" width="261" height="331" position="center" showCaption="false"}

Then connect:

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/vCQ0I5vcsiork2mNwjfZ3_image.png" size="42" width="265" height="534" position="center" showCaption="false"}

Confirm and Disconnect once succesful:

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/kxvZWiFCI_fel_yZnRlZe_image.png" size="34" width="266" height="433" position="center" showCaption="false"}

**3.1)** For a **proxy connection**, you have to add the identifier and the **additional backend URL **at the chargers configuration in FLOEM.

:::hint{type="danger"}
For a **Proxy Connection** with **eCarUp**, please first make a connection directly with the eCarUp backend and restart. After the charger appeared in the eCarUp backend, change the **ocpp\_url** in the station to ours *(ws\://\[sensor\_ip\_address]**:8050**/)* and restart the charger. Else your charger might not appear in their backend.

There is an issue with the BootNotification we are working to solve. Thank you!
:::


**3.2)** For a** normal connection**, you just add the **identifier:**

::Image[]{src="https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/dw7z1aHJ1SyDiCbolCwfe_image.png" size="86" width="707" height="507" position="center" showCaption="false"}

:::hint{type="danger"}
The** identifier** is important, if it does not match to the identifier provided in the chargers configuration, the connection will be **rejected**.
:::

**4)** Here one example of a client of us, who uses a proxy with eCarUp:


![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/Ism9TpLpF2caileaMiB6q_image.png)

Happy Charging!