---
title: Weidmüller AC Wallbox Business
slug: help-center/1ECT-weidmuller-ac-wallbox-business
docTags: 
createdAt: 2023-09-08T18:03:06.893Z
---

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/CfxnJc_BsYQbiSrFqPXbJ_grafik.png)

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/yDOrZMX0KnsCUlI0WxOT5_grafik.png)



![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/-V24fvQpBxpqaI6XcCTWd_grafik.png)

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/zbmTm-etl-NvPD8Esx8Nv_grafik.png)

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/TQgUAWHszMKcrdnhN_tYF_grafik.png)

![](https://api.archbee.com/api/optimize/N5BtsfQVOxPnQzfUQkalm/LRlzk7gRqHyVwjqGH1W13_grafik.png)

- Leave DHCP enabled on the charging station.
- Assign a fixed IP address to the charging station via the router (using its MAC address).
- First, set the IP address of the charging station.
- If you power off the charging station, wait at least 40 seconds before switching it on again.
- On your laptop, set the network so that it is in the same subnet as the Weidmüller device.
- Connect the laptop directly to the charging station (e.g., via Ethernet).
- Change the IP address of the charging station as needed.
- Save the configuration.
- Power off the charging station and wait at least 40 seconds before turning it on again.